This configuration is done directly in the Ruijie Cloud. This DDNS is free with a completely customized subdomain.
Introduction
What is DDNS?
How does it work?
Step 1:
Step 2:
Step 3:
Note: You can configure a DDNS per PROJECT, where each must have a Ruijie Router.
Configuration
1.- Access the portal and log in.
2.- Inside the portal, go to the "Gateway" section, where all the registered routers in the cloud are housed.
3.- Select the router for the project to which you want to add DDNS. Click on the serial number.
4.- A window with the equipment information will open. Click on the "config" option.
5.- Go to the "Dynamic DNS" section. Enable the option to proceed with the configuration of the custom DDNS.
6.- Once the option is enabled, the following information will appear to fill out.
Domain Name: Configure the subdomain name as "SYSCOM2022," then select one of the domain options after the dot.
Map to: Choose the public IP.
Enable the checkbox "I have read and agreed to the User Agreement."
Apply changes by clicking "Save."
Note: The domain may take up to 5 minutes to take effect and refresh.
Once the DDNS changes have been applied, you can use it and manage your port forwarding.
Verification
When sending a ping to the DDNS, you should see the public IP of the site marked, and it should respond.
Other related articles that might be helpful: