Skip to main content
All CollectionsRuijie Networks / Reyee
Ruijie - Router - Enable Deep Packet Inspection (DPI)
Ruijie - Router - Enable Deep Packet Inspection (DPI)

How to enable Deep Packet Inspection (DPI)

E
Written by Engineering
Updated over 10 months ago

In this article, we will learn the steps to configure Failover on Ruijie SMB devices:

DPI

Deep Packet Inspection (DPI) is an advanced method for examining and managing network traffic.

Note: This feature is available from ReyeeOS version 1.206.2220 onwards.

Configuration

1.- Access the router and select the "Router or Gateway" tab, depending on the firmware version.

*If the default IP address is 192.168.110.1

2.- Go to the following path:

  • Overview -> Real Time Flow -> App Real Time Flow

Enable the "Flow-audit Switch" checkbox.

By activating it, it will automatically provide us with real-time information on the current consumption.


To review the history of daily or weekly consumption, go to the following path:

  • Overview -> Flow History -> App Flow History

With this, you will have both historical and real-time information on the consumption of the established applications.

Did this answer your question?