INTRODUCTION
The aim is to detail step-by-step how to access the initial configuration of a Mimosa A6X device. For this, the following is considered:
You already have an account with Mimosa (You can register for free at https://cloud.mimosa.co/).
The device has been unlocked, you can refer to the following article: Mimosa - Process to Unlock a Mimosa Radio.
CONFIGURATION
For the initial configuration, note that the default IP of the A6X is 192.168.1.20/24. To access it, you need to set a static IP on the computer, for example, 192.168.1.30/24.
The connection diagram should be as follows:
Once connected as shown in the diagram, access is done through a web browser as follows:
It will prompt for an update; download the firmware from mimosa.co/firmware and update the device, which may take 5 to 7 minutes.
Once updated, it will ask for the code generated during the device unlock and to generate a new password.
VALIDATION
With the following steps, it is possible to access the A6X device configuration
User: root
Password: generated previously
