The first thing we are going to review are the requirements to access the configuration of the wireless router.
Server Requirements:
The device is enabled with web service (enabled by default).
The device is configured with an administration IP address (default: 192.168.110.1). You can enter http://192.168.110.1 to access the eWeb management system.
Client Requirements:
An administrator can log in to the eWeb management system from a web browser to manage devices. The client refers to a PC or other mobile endpoints, such as laptops or tablets.
Google Chrome, Firefox, IE 10.0 and later versions, and some Chromium-based browsers (such as 360 Extreme Explorer) are supported. Exceptions may occur, such as distortions or format errors, if an unsupported browser is used.
A resolution of 1024 x 768 or higher is recommended. If other resolutions are used, the page's fonts and formats may not align, and the GUI may be less user-friendly, or other exceptions may occur.
The client's IP address is set on the same LAN as the device's IP address, such as 192.168.110.X. The subnet mask is 255.255.255.0. The default gateway is the device's administration address, 192.168.110.1.
Now that we have the requirements ready, we can continue with the configuration
To log in to the eWeb management system, open your preferred compatible browser and enter http://192.168.110.1 in the address bar, then press Enter.
Enter the password and click on 'Log In.
Wizard or Assistan
You will enter the wizard page without logging into the initial setup.
Welcome Page
The welcome page will appear when setting up the device for the first time.
If it's not the first time you access the device, the procedure may vary, as well as the windows presented in this document.
To continue with more configurations, you can follow the following links according to the desired settings.