If it's the first time we enter to set up a wireless router, we can access the following link to first check the requirements.
It is necessary to have a previously configured and cable-connected Home family router so that others can connect to it wirelessly
Once we have the requirements, we can start with the wizard configuration. When the device is not connected through network cables, the following page is displayed
The Mesh Networking function is enabled only when the device is new. Click on Mesh Networking to enable the device to automatically connect to the main router through a seamless roaming network.
We press the Mesh Networking button on the router that is not connected by cable and on the main router to which it will connect wirelessly. When the LEDs on both routers turn solid green without flashing, we press the 'Next' button.
The Mesh connection was not successful
If the connection failed because the router that was supposed to connect wirelessly couldn't find the main router it tried to connect to, the following image is displayed.
What needs to be done in these cases is to check the following:
Please make sure that the Mesh Networking button was pressed correctly.
Please make sure that the primary router (to which it is going to connect) is close to the secondary router (the one that is going to connect to the primary).
Press the reset button for at least 3 seconds. Try the steps to connect the routers through mesh after the secondary router has finished the reset process and the LED lights are steady without blinking
The Mesh connection was successful
If the mesh connection was completed successfully, the following image is displayed.
