To configure a specific power mode for your access point, such as 802.3af, 802.3at, or 802.3bt (if applicable), ensuring that the switch always negotiates the correct power level for the AP, follow these steps:
Access the web interface (eWeb) of the Access Point, either locally or via a virtual tunnel.
Navigate to the Advanced menu.
Select PoE Settings.
Change the power mode by selecting the desired mode (802.3af, 802.3at, or 802.3bt (if applicable)) from the drop-down menu. This ensures that the access point operates with the correct power mode.
If you frequently receive alerts about insufficient power, this configuration can help resolve the issue by ensuring that the correct power is always allocated to the AP.
Make sure to save your changes to apply the new settings.