Check SIP Server Information
To register a SIP account, the following information should be obtained first. If you are using a third-party server, please confirm the information with the service provider.
Server IP
Server Port
Register Name
Username
Password
Tap Settings > Advance > PBX on the indoor monitor. The default password to access the advanced settings is 123456.
Tap the upper right corner to enable the PBX.
After turning on the PBX server, you can check the server IP and port in the upper left corner.
In the example, the server IP is 192.168.36.102 and the port is 5070.
To check the server password, tap the upper right corner and select the desired row for registration by tapping the Edit icon next to it.
You can customize the username, password, and display name, and turn on or off the function.
Register SIP Accounts
Then, enter the SIP server information on the door phone for registration.
Use the device IP to log into its web interface with the username and password. The default is admin.
Go to Account > Basic interface. It appears UnRegistered in the Status box when the SIP account is not registered.
Select the account to be registered. Account 1 is utilized when the Akuvox SmartPlus Cloud service is activated by default.
It is recommended to use account 2 for registration.
Customize the Display Label and Display Name. The display name is the account name shown on the device’s calling screen.
Enter the Register Name, User Name, and Password that are checked on the indoor monitor’s PBX.
The Register Name is the same as the User Name.
Enter the server IP and port in the Preferred SIP Server section. The Alternate SIP Server is for backup.
Check the Account Enabled box to activate the account.
Click Submit to save the settings.
The Status appears as Registered after registering successfully.
