1.- The cameras from the E-Series come by default in DHCP mode, so when they connect to the local network, the camera acquires an IP address. To know this address, we need to have our IPtool software installed.
​

​

2.- Once we have identified the camera's address, we enter it through the web browser to activate it. There, we assign the password and verify that the ONVIF checkbox is selected. After clicking on the "OK" button, the camera is ready to be added. Now, we can proceed to the recorder to add it.

3.- Now open your web browser and enter the address of your EPCOM NVR. Then, go to the configuration menu, and click on "Channel Management".

4.- Click on "+Add", then a screen will appear where you enter the camera's IP address. Select the ONVIF protocol, and enter the username and password of the previously configured camera. Finally, click on "OK", and your E Series camera is now added to your EPCOM NVR.