1.- Enter the IP address of the device to be configured, either directly to the camera or through the NVR and enter the "Function Panel" option.

2.- Select the option "People/Vehicle Detection" in the "AI/ Event" section.

3.- In the option "People/Vehicle Detection", select "1 - Camera to be configured", "2 - Line Crossing or Intrusion", "3 - Enable detection", " 4 - Draw line crossing or intrusion area", " 5 - Assign configuration rules", "6 - select Detection Target", " 7 - Select Detection Target", " 8 - Select Trigger Mode", "9 - enable the trigger you want to perform", "10 - Save changes to the Apply button".