Firstly, configure the IP address of the equipment that is being added to the NVMS monitoring software, (NVR, DVR, IP Camera), This is capable using the IP Tool Configuration Program, as shown below:

Select the device and modify the network parameters according to the configuration of the local network and make the change by entering the device password.

Default Password: 123456

Run the NVMS Monitoring Software, it will ask you for a password after configuring the IP, the password is 123456.

Once inside the software, head over to Resource Management and select the Add, Edit, or Delete Device option.

Once you’ve selected this option, we are now going to head over to the “Add” option.

Once in the Add option, select the device that you’d like to add, then select the edit option. Once in there, put the password of the camera in the configuration and click “Ok”.

The device has now been added correctly. We can now view the camera on Live View, look at Recordings, etc.