Skip to main content
All CollectionsRuijie Networks / Reyee
Ruijie - Configuration of PTP Link with RG-EST310V2 Devices
Ruijie - Configuration of PTP Link with RG-EST310V2 Devices

In this article, the process of establishing a link with Ruijie's RG-EST310V2 devices is explained.

E
Written by Engineering
Updated over a year ago

INTRODUCTION

These devices, designed for PTP or PTMP links, come pre-configured to establish links upon powering on. This greatly aids in a quick and straightforward implementation for the user installing them.

NOTE: It is recommended to have a Ruijie Cloud account for cloud management and remote administration.


CONFIGURATION

The devices are labeled as Recorder End and Camera End. The Recorder End device should be connected to a router or switch that has communication with the main network and has internet access (not mandatory with internet, only if cloud management is desired). The device labeled as Camera End only needs to be powered on:

With the devices connected as shown in the previous diagram, they are added to a project in Rujie Cloud from the mobile app as shown below:

The devices emit an administration WiFi. Connect to it, and it will be displayed as follows:

Once connected to that WiFi network, go back to the application, and the devices will be added.

Finally, set a password and a name for the project.


VALIDATION

To confirm that the link is in operation, access the created project. In this example, it is called 'Enlace_PTP,' and there, the link information is displayed.

Did this answer your question?