When facing issues with the initial access to the RG-AP180, you can follow the following procedure:
1.- Set the IP within the local IP segment of the Access Point to 192.168.110.X, where X is a value from 2 to 250. Subnet 255.255.255.0.
2.- Once the fixed IP is set, connect a computer from the Ethernet port to the WAN/POE port located at the back of the equipment and connect to IP 192.168.110.1.
3.- Once inside the device, the following window will appear:
Enter with the credentials: Username: admin Password: admin.
4.- It will prompt you to change the password (Minimum 8 characters, letters, and/or numbers). After changing the password, it will display the following screen, confirming the password change.
5.- Upon entering, select 'System Mode Switch'.
6.- Select the option 'macc' (Step 1).
7.- Confirm the operation when restarting the device; it will now be in DHCP to be placed in the location where the device would be adopted (Step 2).
Alternatively, adoption can be done through the Ruijie Cloud App.