Skip to main content
All CollectionsRuijie Networks / Reyee
Initial Configuration on Ruijie SMB Router
Initial Configuration on Ruijie SMB Router

Step-by-Step Explanation of the First Access to a Ruijie SMB Router

E
Written by Engineering
Updated over a year ago

Router Models with this web interface:

  • RG-EG105GV2

  • RG-EG210G-E

INTRODUCTION

Ruijie - Reyee

The mentioned devices, supported for such configuration, are designed for small and/or medium-sized enterprises (SME or SMB) and fall within the Reyee range of the Ruijie brand.

NOTE: The Enterprise line is part of the Ruijie brand itself.

Connect the equipment in the following way:

When connected to a LAN port on the router, it will assign an IP via DHCP within the 192.168.110.0/24 segment.

Configuration

1. The first thing you need to do is open a web browser and navigate to the router's IP address, which is 192.168.110.1. It will display the following tab.

Click on 'Start Configuration'.

2. The next tab will request the following information.

Network Name: You can enter any name you prefer, such as the company name.

  • Network Settings: This is how it will access the internet, i.e., the WAN port configuration. If you connect it directly to the modem and don't have custom settings, you can leave it on DHCP.

  • Administration Password: Enter the desired password, as the equipment in its initial configuration does not include any password.

  • Country/Region/Time Zone: This depends on your location.

Finally, click on 'Create network and connect.'

The device will begin loading the configuration.

3. Once it has finished, it will display the main web interface. To access it, you should enter the password you configured in the previous step.

VERIFICATION

Once the device has finished loading the configuration, test that your device now has internet access.

Other related articles that may be helpful:

  • Configure VLAN

  • Load Balancing

  • Configure Failover

  • Enable DPI

  • Limit Speed (QoS)

  • Disable Unused Ports

Did this answer your question?