How to Set Up the Doorbell (Main)?
You need to enter the local IP address of the main doorbell to do the following configuration.
Enter the doorbell's IP address and log in:
1. Click "Config."
2. Under "Intercom," select "Number Configuration."
3. Under "Device Type," select "Main Door Station"
4. Enter "0" for "Door Station No." as this indicates it will be the main doorbell.
How to add the doorbell to the indoor station?
Directly on the monitor screen:
1. Click on the settings option:
2. In the options on the right, select the option marked with three dots (...)
3. Click on the "Configuration" option and enter the access password.
4. In the "Indoor Station Type" option, select "Indoor Station" as this is the main monitor and in "Room No." enter the room number; in this example, we used "101".
5. Click on the camera option as shown below:
6. In the "Main Door Station" option, enter the IP address of the main doorbell.
In this example, the main door station have the IP Address : 172.16.10.246.
With these steps, the main doorbell and slave doorbell will be linked to the main monitor.