Skip to main content

How to update the firmware of the E Series ACM6W-GEN3 monitor to enable intercom between monitors?

E
Written by Engineering
  1. Go to the following link where you can find the corresponding firmware in the download section:

2. Once the firmware has downloaded, copy and paste the update file to a microSD card smaller than 32GB and formatted in FAT32.

3. Insert the microSD card with the previously loaded firmware into the monitor's microSD card slot. The monitor must be turned off.

4. Turn on the monitor and wait for the firmware update to complete. Once the update is complete, remove the microSD card and the monitor will be updated.

Did this answer your question?